EN
< BACK
TURBOFLEX/SLIMLINE
These special holders combine Alberti design and technology with Nakanishi products in order to reach up to 60.000RPM. Turboflex are air driven heads featuring a pneumatic air motor inside the main body which transmits the rotation to the spindle and cutting tools. The air can be supplied from the machine spindle or from the stop block.. With much smaller dimensions compared to standard angle heads, Turboflex products are suitable for light machining such as drilling, polishing, engraving, etc where higher speed is required (such as moulds). Slimline heads are mechanically driven from machine spindles and do not include an air driven mortor. Both Turboflex and Slimline can be authomatically exchanged on the machine by the tool changer arm.
DOWNLOAD
Turbodrill
Brother
Fanuc
Robodrill
DMG MORI
Milltap 700
ORIGINALITY
SERVICE